New range rover evogue rear brake pad replacment

To activate the service mode;

1-release the parking brake

2-gearlever in the positions of neutral or park

3-turn the ignition on

4-Press and hold the EPB switch (This reads like the EPB is off)?

5-wait 2 seconds

6-press and hold the accelerator pedal

6-wait 2 seconds

7-turn ignition on and off within 2 seconds (Is this ignition on or off and then on)?

8-an audible signal will sound

9 release the accelerator pedal

10-release the parking brake (So should this be apply the EPB)?

deactivate service mode

1-gear lever in N OR P position

2-turn on the ignition

3-pull and hold the EPB switch

4-wait 2 seconds

5-press and hold the accelerator pedal

6-wait 2 seconds

7-turn the ignition on and off within 2 seconds (Is this ignition on or off and then on)?

8-an audible signal will sound

9-release the accelerator

10-release the parking brake